How to choose photocopier paper

 

Although photocopying paper is a special paper for copiers, but its application range is the most wide, can be widely used in copiers, needle printer, laser printer, inkjet printer and other requirements on the output effect is not very high, especially in needle printer and laser printer more widely used.

Copy paper commonly used models are :B5, A4, B4, A3, 16K, 8K and other six models.Copy paper is the most economical in all kinds of office equipment, paper of paper, such as: 8 B5 copy paper packaging, for example, each package for 500, namely a total of 4000 copies per box, each box B5 copy paper price is in 80-120 yuan of money, so that, on average, the price of a sheet of paper is only 2 to 3 cents, and other office equipment, paper (as some of the special inkjet printer paper) than is very cheap.

Copy paper is the largest consumption of a kind of material in electrostatic copier, is the reproduction quality of the body, so we must pay attention to the correct use of copy paper.

Fold thickness

Electrostatic copiers use the thickness of paper, generally 64-80 grams per square meter, there are photocopiers can use 50-200 grams per square meter of paper.

Folding surface luminosity

General electrostatic copy paper, slightly high surface luminosity can, if it is too smooth on fixing adverse, and not easy to cure.Single adhesive paper can be used as required. If there is a duplicating machine with two sides, double adhesive paper is preferred.White is best on the surface of the copy paper.

The density of folded paper

The fiber of paper is better to be dense and fine.Because the paper fiber is too thin can be too thick, one is to affect the quality of photocopying imaging (that is, the rate of paper separation), the second is easy to produce paper wool, paper scraps, dirty machine.In particular, the optical part of the dirty will cause the copy of the bottom ash.The paper is too brittle and easy to crack and cause paper jam, but also affect the copy and copy of the long-term storage.

Stiffness of folded paper

Some paper, although the gram number is appropriate, is not always suitable for the use of copier, because: weight and stiffness are two different things, and often due to poor stiffness, in the process of transmission a little resistance will wrinkle block.If there are two kinds of paper are 70g per square meter, but the paper's fiber tissue is soft, stiffness difference, a little resistance to deformation wrinkle often stuck paper.So only stiff paper is suitable for electrostatic copiers.

Damp ingress of folded paper

Wet paper (paper with too much water content), because the insulation performance is reduced, so affect the quality of the copy.Its manifestations are as follows:

A. Paper jam is easy to occur, especially if it is glued to the optical conductor (drum) and cannot be separated, which affects the copying efficiency.

B. Image, light handwriting and large grey background.Such as in the southern mildew season, serious will not copy.

C. Easy to be deformed by heating.

So copy paper must prevent moisture, it is best to put in a ventilated and drier place.Store-bought photocopier paper (500 sheets), use one pack and remove another.A ream of paper should not be opened before cutting. The finished paper should be kept as a stack.