DIY manual production of original paper
pulp paper
1. The charm of paper art lies in its infinite expression ability, and Yan paper should be the most elegant model
2. Color paper tape, you can buy different length
3. To make body parts, first splice three colors: yellow, orange and blue. Each color is 21cm long. If the length is not enough, just connect the next one. Glue the joints together
4. Start rolling from the yellow end, and finally apply glue to the blue tail for fixation
5. Knead it into a water drop like the above picture. Gently knead it, not too hard
6. Folding wings requires 21 cm blue, 21 cm orange and 10 cm red. The color and size of the two wings can be different, but the color ratio must be
7. The wings are folded like this
8. Blue covers both sides
9. To make the head, you need 15cm blue, 10cm red, 5cm yellow, and 3cm blue. Start from the short blue side, and then roll the tail with glue
10. For the tail part, the color should be 10cm yellow, 10cm orange, 15cm red and 20cm blue. In fact, two wings and tail can be interchanged, but the wing tip or tail tip are inclined
11. Assemble all parts with glue
12. Making a bird's beak with yellow paper, finish!
.jpg)
.jpg)
.jpg)
.jpg)
